However, there are some exceptions, e. Following is his description. You’ll notice, when the card is in its place. However, if you want to replace the video card, you have to remove some more screws placed around the cooler. The bottom memory sticks are cooled by a thin sheet of metal. Possibly, these are just wrong slider settings, but in the case of the old GeForce Go card I managed to reduce the 2D clocks to 25MHz for the core and MHz for the memory. One thing is worth special consideration:
|Date Added:||13 July 2008|
|File Size:||70.80 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Case Study: Replacing the Video Card of a Dell Inspiron E1705 (9400)
The Core Duo processor leverages two execution cores on a single chip to help increase your PC’s ability to run multiple applications smoothly with fewer hiccups.
First, I had to check, if the left heat pipe GTX would fit into the case. After examining the result of our work, it’s now time to place the brand new card into the slot. It is affixed at its upper part by two screws. Finally, I wish you good luck in disassembling the notebook and replacing some of its hardware. Warranty and Support Services. It is attached to the rest of the case very tightly by some clasps and bolts. In our case one has to disconnect pins No.
After removing the hinge cover, you’ll get the following result: Even dedicated GPUs are usually soldered to the main board. Then, you need to connect the LCD, pressing the connector slowly into the socket of the GPU, and place the cable into the recess of the case.
Press F5 immediately in order to run the diagnostic program, and, after performing the necessary tests, enter the BIOS, where you can see the following: Employee and Student Discounts. Please share our article, every link counts! Multitasking on the Move The Core Duo processor leverages two execution cores on a single chip to help increase your PC’s ability to run vodeo applications smoothly with fewer hiccups.
Let me one more time refer to the manufacturer’s website: Please refer to the following link for further details: First, take a look at the following links: If you do not want to disassemble the card, and would only like to exchange the thermal paste, it is enough to unscrew four large screws affixing the radiator itself.
During the following steps you won’t need them anymore. After fixing all the parts of the cooling system, you are about to set up the top case and mount the display.
However, if you want to replace the video card, you have to remove some more screws placed around the cooler. One has to carefully lead both antenna cables of the WLAN card to the notebook’s top side. Next the video card’s cooler has to be dismantled.
Dell Inspiron E1705 Video Cards
The next step is to unscrew the laptop. After removing the hinge cover, you’ll get the following result:.
One thing is worth special vdeo Unscrew the screws starting at the upside of the base unit marked with small red circles and those at the bottom of the base unit. In general, it is not possible at all.
Before removing the CPU, one needs to twist the screw on the Socket clockwise with a screwdriver. I failed to vvideo the radiator, as it was fixed too tightly.
Case Study: Replacing the Video Card of a Dell Inspiron E () – Tech
Following is his description. Further details about dismantling the keyboard can be found at Dell’s website: There is plenty of room on the right side of the case. Please remember, that you have to connect the white cable to pin No. The Inspiron E offers an incredible viewing experience featuring an optional inch widescreen UXGA display that gives you enough space to run applications side-by-side with incredible detail.
Possibly, replacing the thermal paste with an AC5 on the GPU would reduce the temperature by several degrees.