A solid LED indicates that a card is inserted with no read or write capacity. Make sure the device you want to connect to is discoverable and within range of your computer. A DSL wall connection is shown here. These images show brackets on the top and bottom of the display panel. Remove the 2 Phillips screws 2 that secure the module to the computer.

Uploader: Taktilar
Date Added: 20 March 2017
File Size: 51.81 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 12626
Price: Free* [*Free Regsitration Required]

The optical drive is located on the left side of the computer viewed toouchsmart behind under the inverter board. Intel Core i5 processors. Thermal module heat sink for use with the graphics board.

Power supply, W, external not illustrated. Please verify your product is powered on and connected, then try again in a few minutes.

HP TouchSmart IQ Series Desktop PC – Setting Up Your TouchSmart PC | HP® Customer Support

To remove it, you have to first remove the processor heat sink, and then the graphics card heat sink. Keyboard, jade with Beats logo for use in Poland.

The HP TouchSmart button does not turn the computer off. Brick assembly and power connection. The cable connector is secured with 2 screws. Antenna for use with 1×1 WLAN module not illustrated. Connect to your digital home theater system or your digital surround sound speakers. Failure to properly set the converter board jumper can bluetoooth in damage to the converter board.


Connect an S-Video cable to the S-Video In connector Blocated on the back of the computer behind the touchsmxrt cover.

Transfer videos from your digital video camcorder 4-pin connector. Keyboard, USB for use in the Netherlands.

Antenna for use with 2×2 WLAN module not illustrated. If you have a cable modem, the connection from the wall to the modem uses a coaxial cable.

This page requires Javascript. How does HP install software and gather data? Setting up a wireless home network First-time wireless network installation requires that you:. Once pins are damaged it may be necessary to replace the system board. Remove the system board see System Board.

Set up an Epson printer wirelessly How To: Remove the square cover see Cable Cover. Then, turn on the computer.

How to Turn on Bluetooth in HP TouchSmart

If you have an actual wired network in your home with Ethernet connectors in the wall, connect directly from your computer Ethernet port to the Ethernet wall connector with an Ethernet cable. Or, if the computer is already turned on, press the touchsart to open the HP TouchSmart software. This could take up to 3 minutes, depending on your computer and connection speed. If prompted, enter the PIN, and then click Connect.


Please try again shortly. You must remove the memory cover to access the memory modules.

Follow the on-screen instructions on the computer tohchsmart the device to complete the pairing process. Email list of drivers. Fix laptop screen scratches How To: Replace the connector cover by aligning the hooks on the right edge of the cover with the slots on the computer, and then pressing it until it snaps into place. Setting up the wireless keyboard or mouse.