MAGICOLOR QMS 2200 DRIVER

This is a semiconductor laser. Paper empty detec- tion: E Fan motor errors There are five fan motor errors: Adjust the humidity for paper storage. Hope this review helps. Transport roller Transports the paper for back-side printing. Does the control panel display “Ready” or “Power Save” mode?

Uploader: Vumi
Date Added: 20 August 2006
File Size: 59.55 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 7683
Price: Free* [*Free Regsitration Required]

Paper lifting arm Heat roller Conveys the heat from the heater lamp to the fusing belt.

konica, minolta, magicolor, 2200, toner, cartridges, minolta, qms, 2200, toner

Remove the 1 set screw for the rack home position sensor for black toner and the 1 connector to remove the sensor. Om apparaten anvands pa annat satt an i denna bruksanvisning specificerats, kan anvanderen utsattas for osynling laserstralnig, som overskrider gransen for laserklass 1.

Replace the color toner cartridge. No Properly insert the connector. When the front cover, fusing cover, or transport cover is open. Does it operate when the power supply is turned on?

  EPSON ARTISAN 835 WIN7 DRIVER

Technical Details

Environmental requirements The printer magicoolr the following operating environment requirements: Be respectful, keep it civil and stay on topic. During power supply fan motor error Stopped 3.

Disconnect 6 connectors and one wire harness. Remove the controller box 1. Paper detecting sensor Detects paper that has been sent to the duplex unit.

Clean the laser lens cover. This test prints one page. If a magico,or printer is suddenly heated, condensation can form inside of it and cause the following problems.

No Ensure the connection of the connector PJ28A is secure. Get to Know Us.

Oversatisfied clients since Dirty image transfer roller. Remove the 3 connectors for the rear rack bearing and the 4 set screws.

When discharging to bin 1. Static discharge brushes Discharge static electricity from the paper. Remove the 6 connectors for the HV1 circuit board and 2 set screws. It is drawn onto the image transfer belt for transfer. Does the suction fan motor M7 operate during power on initialization?

  MICROTEK V6UPL SCANNER DRIVER

Minolta-QMS Magicolor DeskLaser Overview – CNET

Door sensor PC11 is off. Remove the 5 screws for the upper-right reinforcement plate. Transport image transfer belt system, Paper image transfer: Vacuum excess toner from the inside of the printer with a toner vacuum.

Remove the duplex paper take-up motor Duplex paper’ take-up motor 1. The machine is too noisy to leave running all the time, yet it’s time-consuming to boot up when you do shut it qme. Image transfer roller 4 OPC drum Blade Bias Sheel Bias P.