Change Item Press Esc to save the configuration and exit. Press Enter to select the model name of the Moxa board you are installing. Open the Control Panel, click on the Network icon, and select the Adapters tab. In addition, each RS serial port supports up to A typical test report for a Moxa board is shown below. At this point, you can assume that the board and all of its ports have been installed successfully. Select the Uninstall option.
|Date Added:||14 October 2013|
|File Size:||43.39 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Remove the slot cover bracket if there is one. If one or more board is detected, you will see a message similar the following: See the Hardware Installation chapter.
Moxa CPU-T Технические характеристики онлайн [1/2]
Utilities, such as Data Scope, Monitor, Terminal Emulator, and Diagnostics are included to make it easier to debug, monitor communication status, provide terminal emulation, and transfer files. Click on Finish to continue with the rest of the installation procedure.
Make sure the cable wiring is connected correctly. Select Display a list of all the drivers in a specific location, so you can select the driver you want.
Click on OK to complete the installation of the board. A typical test report for a Moxa board is shown below.
CPU/UL User`s Manual
Include as much detail as possible for a shorter product repair time. The CPU and CPUL implements full modem control signals to ensure compatibility with a wide range of serial peripherals, and they work with both 3. The driver files will be copied to the SCO system.
The CPU board and ports are ready to use. The port numbers will be assigned in sequence.
Wait while the driver software is installed. Fasten the holding screw to fix the control board in place. Click on OK to return to the Network window. This may also apply to PCI slots in a PC with a different motherboard, which may use moxq device number sets.
CTI Installing the Driver 1. Try changing the COM number mappings.
Click on Add to open the Property configuration window to change port settings and set advanced FIFO configuration options. In addition, each RS serial port supports up to After plugging the board into an expansion slot and powering on your PC, Windows co automatically detect the new board, and the Found New Hardware window will open.
Multiport & I/O Cards
Select Specify a location and then click on Next to continue. Notify your sales representative if any of the above items are missing or damaged. Software Causes and Solutions: The installation procedure for Windows is similar.
With twenty-plus years of experience in serial board technology, Moxa is able to offer one of the most comprehensive selections of industrial-grade multiport serial cards in the world. The next window shows the model number of the board, and indicates that Windows has completed the driver mkxa.
Press F2 to start the installation. Basic information about the board is displayed on the General page. Be the first to review this product.
MOXA CP-102U/UL driver used ( tube 6)
The board pc not properly plugged into the system. Windows In this section, we describe the installation procedure for Windows The same PCI board will have different system configurations if switched to a different PCI slot; this is called slot-sensitivity or slot-dependency.